Psychedelia.dk

Velkommen til psychedelia.dk. Vi er Danmarks største community for fornuftig anvendelse af rusmidler og legalisering.
Dato og tid er 29 mar 2024 01:55


Alle tider er UTC + 1 time [DST ]




Skriv nyt emne Svar på emne  [ 22 indlæg ]  Gå til side 1, 2  Næste
Forfatter besked
Indlæg: 26 maj 2015 11:52 
Offline
Medlem

Tilmeldt: 26 apr 2015 15:28
Indlæg: 79
Hey jeg har en F/k eksamen lige rundt om hjørnet, og tænker jeg ville slutte af på fineste maner ;).

Da jeg har muligheden for at trække kemiske reaktioner, så havde jeg tænkt mig at lave et narkotisk stof. (vil self ikke tage det) Men vil vise hvor hurtigt det er at sammensætte et ulovligt stof, og sådan med helt normale ting i et F/K lokale.


Top
 Profil  
 
Indlæg: 26 maj 2015 12:01 
Offline
Insane psychedelia user!
Brugeravatar

Tilmeldt: 12 jan 2003 02:01
Indlæg: 4780
Held og lykke med det.

_________________
Der er ingen planet B.


Top
 Profil  
 
Indlæg: 26 maj 2015 12:15 
Offline
Medlem

Tilmeldt: 26 apr 2015 15:28
Indlæg: 79
søger hjælp, om nogen der har en ide om stof man kan lave


Top
 Profil  
 
Indlæg: 26 maj 2015 13:21 
Offline
Insane psychedelia user!
Brugeravatar

Tilmeldt: 12 jan 2003 02:01
Indlæg: 4780
Du får aldrig lov til at lave et ulovligt stof i skolen.

_________________
Der er ingen planet B.


Top
 Profil  
 
Indlæg: 26 maj 2015 15:13 
Offline
Dedikeret medlem

Tilmeldt: 14 apr 2011 00:03
Indlæg: 1360
Det ville måske være relevant at nævne, hvad en F/K eksamen er? Er det noget folkeskole? Når jeg googler det, finder jeg kun en fagpakke for 5. semester odontologi studerende ved AU.

Men som йети skriver, vil det ikke være relevant at lave noget ulovligt - og typisk vil man jo blive stillet en konkret opgave i en eksaminations situation. Havde du så tænkt dig at slutte af med et "og så blander vi lige det her til noget narko"-freestyle forsøg ?


Top
 Profil  
 
Indlæg: 26 maj 2015 21:05 
Offline
Medlem

Tilmeldt: 26 apr 2015 15:28
Indlæg: 79
vi må jamme frit omkring kemiske forbindelser, så længe vi har en rød tråd til emnet

htx prøve eksamen på andet år


Top
 Profil  
 
Indlæg: 26 maj 2015 21:42 
Offline
Insane psychedelia user!
Brugeravatar

Tilmeldt: 12 jan 2003 02:01
Indlæg: 4780
kong.svamp skrev:
vi må jamme frit omkring kemiske forbindelser, så længe vi har en rød tråd til emnet

htx prøve eksamen på andet år


Det er jeg helt sikker på at du har misforstået.

_________________
Der er ingen planet B.


Top
 Profil  
 
Indlæg: 26 maj 2015 22:05 
Offline
Medlem

Tilmeldt: 26 apr 2015 15:28
Indlæg: 79
vi fik af vide "I har frie muligheder så længe i holder jer til emnet, men i skal lave mindst 4-5 forsøg


Top
 Profil  
 
Indlæg: 26 maj 2015 23:31 
Offline
Admin
Brugeravatar

Tilmeldt: 19 maj 2003 01:01
Indlæg: 2752
Der er ingen kemilærer i sit rette sind der lader jer lave et rusmiddel på et gymnasium. Måske kan du lave noget acetylsalisylsyre eller lidokain. Det er nogle typiske og helt udmærkede gymnasieforsøg.

_________________
Penalties against possession of a drug should not be more damaging to an individual than the use of the drug itself.

-Jimmy Carter


Top
 Profil  
 
Indlæg: 27 maj 2015 08:00 
Offline
Medlem

Tilmeldt: 26 apr 2015 15:28
Indlæg: 79
Havde tænkt på lidokain, men jeg har tænkt mig at rykke til hhx alligevel næste år så hva har jeg at miste? Prøven er sat op på den måde vi kommer ind 5-6 grupper eller elever så der er ikke opsyn på mig 24/7.


Top
 Profil  
 
Indlæg: 27 maj 2015 09:53 
Offline
Dedikeret medlem
Brugeravatar

Tilmeldt: 28 maj 2010 22:06
Indlæg: 957
Geografisk sted: Syd for Skagen
At du har noget baggrundsviden indenfor visse fag, hvis nu du skulle bruge dem senere hen.

Desuden, hvorfor er det så vigtigt at lave lige netop narkotika? der er da et hav af andre endnu federe kemi forsøg at lave, når du nu har en åben dør til kemikalier..

_________________
Bagsidens gule sider - Giftlinjen, rådgivning om misbrug mm.
Bekendtgørelse om euforiserende stoffer
Cannabis Guide

DDSIT: LÆS OP PÅ DIT STOF kong.svamp, inden du udtaler dig om noget du tilsyneladende ikke aner en skid om...
kong.svamp: øhm har du HTX på 2 år med fyskik OG kemi på A?


Top
 Profil  
 
Indlæg: 27 maj 2015 16:46 
Offline
Medlem

Tilmeldt: 26 apr 2015 15:28
Indlæg: 79
har kigget pg ingen siger mig noget.


Top
 Profil  
 
Indlæg: 27 maj 2015 17:38 
Offline
Dedikeret medlem

Tilmeldt: 16 okt 2011 00:36
Indlæg: 1364
Randomname skrev:
Det ville måske være relevant at nævne, hvad en F/K eksamen er? Er det noget folkeskole? Når jeg googler det, finder jeg kun en fagpakke for 5. semester odontologi studerende ved AU.



jeg gætter på at F/K står for fysik og kemi?..

@kong.svamp: lav dog noget andet end narko, hvis du ikk kan komme på hvilket "let" stof du lige vil trylle frem.. :-)

MVH stop

_________________
legaliser frihed! °ºª -og løs problemerne istedet!


Top
 Profil  
 
Indlæg: 27 maj 2015 21:15 
Offline
Dedikeret medlem
Brugeravatar

Tilmeldt: 23 mar 2010 09:54
Indlæg: 998
Geografisk sted: Gartneriet
Tror bestemt heller ikke du slipper afsted med et form for rusmiddel. Er det for at kunne være sej at du ønsker den retning, siden alle andre mulige forsøg ikke har din interesse?
Hvad er formålet med at det bestemt skulle være et rusmiddel, kontra andre ting? jeg har knap selv været til en fysik-time, så jeg har minimal viden om emnet.

_________________
Bagsidens gule sider - Giftlinjen, rådgivning om misbrug mm.
It ain't real, it ain't a dream... Then what is it? - Psychedelic Reality!


Top
 Profil  
 
Indlæg: 31 maj 2015 14:01 
Offline
Medlem

Tilmeldt: 26 apr 2015 15:28
Indlæg: 79
Hvorfor alle de spørgsmål? Og nej det skal ikke være let det skal være så kompliceret som muligt.

Gør det ikke for at være sej? Hvad er det for et spørgsmål?


Top
 Profil  
 
Indlæg: 31 maj 2015 19:32 
Offline
Moderator
Brugeravatar

Tilmeldt: 13 jun 2007 18:56
Indlæg: 3533
Geografisk sted: Outside
Hvis du ville have det så kompliceret som muligt, så find da på noget selv, jesus... Lav en portion krokodil eller noget meth hvis du absolut vil ødelægge din eksamen med ulovligheder... :roll:

_________________
"Inform yourself. What does inform yourself mean? It means transcend and mistrust ideology. Go for direct experience." - T. McKenna


Top
 Profil  
 
Indlæg: 31 maj 2015 20:10 
Offline
Dedikeret medlem

Tilmeldt: 14 apr 2011 00:03
Indlæg: 1360
Jamen okay, så slå dig da løs til din eksamen. Her er fx. total LSD syntesen fra erowid (https://www.erowid.org/archive/rhodium/ ... -buzz.html)

Citat:
Total Synthesis Of Lysergic Acid

This is the easiest way to totally synthesize lysergic acid. There are other ways, but after reviewing other methods, I found this to be superior. It is quite complicated and it takes good modern equipment.

JACS, 78, 3087 (1956). 3-Indolepropionic acid, 94.5 g (0.5 mole) is dissolved in 600 ml of water containing 20 g of NaOH. The solution is mixed with 100 g of Raney Nickle catalyst and hydrogenated at room temp in a steel bomb at about 3,500 psi until the uptake of hydrogen stops (about 20-30 hours). Filter off the catalyst and wash it with a little water to remove the product that is clinging to it. Add 85 ml of concd HCl acid to the filtrate, and cool. If your reduction is incomplete, you will now have unreacted starting material separate, and this must be removed by filtration. Benzoylate the filtrate (the Schotten and Baumann method is preferable), using 210 ml of 12 N NaOH 180 ml of benzoyl chloride. Keep the solution alkaline throughout the benzoylation, and keep the temp below 40°C by cooling. When the benzoyl chloride is fully reacted, the reaction mixture is cooled and acidified with 300 ml of HCl acid. Filter the crude product by filtration, wash with water, and extract with four 1 liter portions of hot water. Separate, and crystallize the resulting syrupy product from a few volumes of methanol. Filter and wash with a little cold methanol to get a little over 100 g that melts at 151-153°. This is l-Benzoyl-3-beta-carboxyethyl-2,3-dihydroindole. This can be purchased to eliminate this step.

1-Benzoyl-5-keto-1,2,2a,3,4,5,-hexahydrobenzindole. 118 g of the above product (1-benzoyl-3-B-carboxyethyl-2,3-dihydroindole) is mixed with 200 ml of pure thionyl chloride. This solution is allowed to stand for 30 min, then it is warmed gently for 15-21 min on a steam bath. Excess thionyl chloride is completely evaporated with the temp maintained between 22-26°C in vacuo. The crude acid chloride is dissolved in dry carbon disulfate. This solution is added, in a thin stream, to a well stirred suspension of 240 g of aluminum chloride in 1750 ml of carbon disulfate in a 5,000 cc flask. Note: this must be done under a fume hood. A complex will separate and bog down the stirring device. Heat this mixture under reflux with stirring for 1 hour. Decompose this mixture by adding 500 g of ice, 250 ml of concd HCl acid, and 500 ml of water, all while good stirring is continued. Cooling of this operation is affected by periodic distillation of the carbon disulfate in vacuo. After the decomposition is complete, any remaining carbon disulfate is removed completely in vacuo, and the product is extracted with 2 liters of benzene. The extract is washed well with 500 ml of 2 N NaOH in three portions, and then with water. Dry (with the usual magnesium sulfate), and evaporate to a small volume in vacuo. Add this small volume to several portions of ether to get the ketone to crystallize (add slowly), and filter, then wash with ether to get 85 g of pure title product, mp: 146-147°C.

1-Benzoyl-4-bromo-5-keto-1,2,2a,3,4,5-hexahydrobenzindole. A solution of the above indole (305 g) in 2,200 ml of glacial acetic acid is warmed to 40°C. While the reaction is illuminated with a 250 watt bulb, 352 g of pyridine hydrobromide perbromide is added in portions, over 5 min with shaking. The solution is then heated to 60° and is held between there and 55°C for 30 min. Treat the mixture with carbon, and evaporate to a small volume in vacuo. The residue is taken up with 2,200 ml of chloroform, and wash this solution with several portions of water, dry as above, and concentrate in vacuo. Crystallize the residue from 2,200 ml of 50% acetic acid and 50% ether to get 270 g of title product that melts at 180.5-181.5°C. Another crop can be obtained from concentrating the fltrates. Yield: 30 g of less pure product.

1-Benzoyl-2,2a,3,4-tetrahydro-4-methyl-2-methyl-1,3-dioxolan-2-yl-methyl-aminobenzindol-5-(1H)one. A solution of the last indole product above (270 g) and 307 g of methylaminoacetone ethylene ketol in 4,500 ml of dry benzene is refluxed for 21 hours under a slow stream of nitrogen. The mixture is cooled and 151 g of methylaminoacetone ethylene ketol hydrobromide is filtered off. The filtrate is washed with ice water, then extracted with 2.5 liters of cold dilute HCl acid containing 150 ml of the concd acid. The acid extracts are immediately added to an excess of ice cold dilute NaOH. Extract with 1 1iter of chloroform, dry over magnesium sulfate, treat with carbon and concentrate by evaporation in vacuo. The residual ketol-ketone is crystallized from acetone to yield 220 g, mp: 135-136°C.

5-Keto-4-N-methyl-N-acetonylamino-1,2,2a,3,4,5-hexahydrobenzindole. 20 g of the above product is dissolved in a mixture of 250 ml of concd HCl acid and 250 ml of water, and the solution is kept under nitrogen for 5 days at 37°. Cool the mixture, treat with carbon, filter, and concentrate the filtrate in vacuo to a small volume. Treat the residue with an excess of sodium bicarbonate, extract with cold chloroform, and remove the chloroform by evaporation in vacuo at room temp. The crude diketone is powdered, slurried with 75 ml of benzene-ether, and filtered. Yield: 9.8 g, mp: 105-107°C.

9-keto-7-methyl-4,5,5a,6,6a,7,8,9-octahydroindolo-(4,3)isoquinoline. 25 g of the above product is mixed with 550 ml of absolute ethanol. Stir this mixture under nitrogen and cool to -15° with an external freezing mixture. Sodium methoxide is added (17 g) and the mixture is stirred for 10 min at -10 to -12°. Cool to -25°, and the product is filtered and washed (while still in the funnel) with cold ethanol and ether. Without exposure to air the crude ketone is immediately slurried with a little ice water and filtered. Wash with ice water, ethanol, then ether (all cold) to yield 16 g of product melting at 145-147°.

4-Acetyl-9-keto-7-methyl-4,5,5a,6,6a,7,8,9-octahydroindolo-4,3-quinoline. 24 g of the last product is added to 80 ml of cold acetic anhydride. The mixture is held at 25° for about 5 min, then thoroughly cooled, filtered, and the product (a solid) washed with ether to yield 20.5 g, mp: 169-170°. A second crop is obtained by concentrating the mother liquor by evaporation.

A mixture of the last product (1.0 g) and 10 g of palladium carbon (5%), in 35 ml of xylene, is heated under reflux for 4 hours. The catalyst is filtered and extracted with hot methanol and chloroform. The combined extract filtrates and the initial filtrate are combined and evaporated in vacuo. The residue is recrystallized from water to give 0.6 g of a monohydrate product that melts at 255-256°. This product is called 4-acetyl-4,5,5a,6-tetrahydro-9-hydroxy-7-methylindolo-(4,3fg)-quinolinium hydroxide betaine.

4-Acetyl-9-hydroxy-7-methyl-4,5,5a,6,7,8,9,10-octahydroindolo-(4,3fg)-quinoline. 1 g of the above betaine in a mixture of 20 ml of ethanol and 5 ml of water, is treated with 0.08 g of sodium borohydride, and this solution is refluxed for 10 min and kept at 25° for 1 hour after the reflux is finished. The solvent is distilled off, and the residue is taken up in a mixture of chloroform and water. The chloroform solution is separated, dried as above, and then the solvent is distilled off. The residue is recrystallized from a nitromethane-ethyl acetate mixture to yield 0.2 g (21%), mp 193-196°. Not only is this a small scale, but it is a poor yield, requiring you to perform it several times to get enough product to perform the next step. When you have more than enough, convert the product into its hydrochloride form by dissolving in dry methanol and precipitating with dry hydrogen chloride.

4-acetyl-9-chloro-7-methyl-4,5,5a,6,6a,7,8,9-octahydroindolo-(4,3fg)-quinoline hydrochloride. 3.1 g of the above product in its hydrochloride form is dissolved in 75 ml of liquid sulfur dioxide contained in a glass lined, high pressure bomb, or autoclave. Thionyl chloride (1.2 ml) is added and the vessel is sealed and kept at 25° for 6 hours. Vent the vessel carefully and remove the mixture. Evaporate the sulfur dioxide while keeping the volume of the solution constant by the slow addition of dry ether. The amorphous chloro hydrochloride is filtered, washed with ether (dry) and dried by evaporating in vacuo to give 3.5 g of product, mp:130-135°.

4-Acetyl-9-cyano-7-methyl-4,5,5a,6,6a,7,8,9-octahydroindolo-(4,3fg)-quinoline. 40 g of dry, powdered sodium cyanide, is added to ice cold liquid hydrogen cyanide and stirred gently with ice bath cooling. Speed up the stirring, continue the cooling, and add 7.5 g of the amorphous product directly above. Continue stirring for 30 min, then the hydrogen cyanide is distilled under enough reduced pressure to keep it coming over the condenser at a temp below 10-12°. The residue is mixed with chloroform and ice water, and the resulting mixture is filtered. The organic layer of the filtrate is separated and the aqueous layer is extracted with two separate portions of chloroform. The combined extracts (this would include the separated chloroform, as usual) are dried over magnesium sulfate, decolorized, and the solvent removed by distillation in vacuo. Crystallize the product in ethyl acetate. Yield: 3.3 g, mp: 173-174°. Recrystallize again for extra purity.

9-Carbomethoxy-7-methyl-4,5,5a,6,6a,7,8,9-octahydroindolo-(4,3fg)-quinoline. 1 g of the last product is mixed with 15 ml of methanol and 0.25 ml of water. With external (ice bath) cooling add 2 ml of concd sulfuric acid slowly. Seal this solution in a high pressure bomb with a glass liner (or in a glass tube taking safety precautions in case of explosion) with a nitrogen atmosphere, and heat at 100° for 23-24 hours. Note: I have seen a big pressure cooker (like gramma cans peas with) work for some of these bomb procedures. I do not recommend it, but here is how to do it right, if you feel you must. Use only the great big heavy duty models, in excellent condition, set the pop off (relief valve) for near maximum position; never, ever tamper or modify this valve to get more pressure. Put the product in a glass beaker, put it in the cooker, flush with nitrogen, heat and stay in a different house during the reaction. Carefully turn off heat, notice or record pressure gauge after time has elapsed. Wait until pressure drops noticeably, bleed off remaining pressure and get product.

Treat the mixture with decolorizing carbon and then evaporate in vacuo to 10 ml. Pour onto a mixture of 30 ml of chloroform, ice, and 10 g of sodium bicarbonate. Separate the chloroform layer, and extract the aqueous phase with three 10 ml portions of chloroform. The combined chloroforms are dried, evaporated to dryness in vacuo, and the product is crystallized from benzene to give 1/2 g of product that melts at 159-160°. You may purify more by recrystallizing from ethyl acetate. This is not very much product. As with the procedure 4 steps back, you will have to perform this step over and over. If you try to double or triple the amounts given, you may get more product, but you will hurt the yield.

dl-Lysergic acid. 3.9 g of the last product is mixed with 78 ml of 1.5% potassium hydroxide solution. Reflux for 30 min under nitrogen. 8.5 g of hydrogen sodium arsonate, and Raney Nickle (16 g wet), that has previously been deactivated by boiling in xylene suspension (see JOC, 455 (1948) to deactivate), is added and the mixture is refluxed and stirred under a nitrogen atmosphere for 20 hours. The solution is treated with carbon, and the crude lysergic acid is precipitated by neutralization to pH 5.6, and then filter it off and wash with water. Yield: 1.04 g. A second crop is obtained in the usual manner (0.15 g). Purify by dissolving in dilute ammonium hydroxide, treat with decolorizing carbon, and reprecipitate with carbon dioxide to get a mp of 242-243°. You may be able to get an analytical or laboratory consultant to make one of these products near the final step, thereby eliminating the need to go through all of the steps as described. This will save you much time, but as these people are highly trained, their time will be costly.

Lysergic acid can be made from many ergot derivatives by hydrolysis of these compounds. These compounds include ergonovine, ergotamine, ergokryptine, ergosine, methysergide, ergine, and a few others. Total synthesis of these compounds is impractical, as lysergic acid is made before the alkaloid. You could stop the operation as soon as you reach lysergic acid, otherwise you will have to hydrolyze as described below. There are many analogs of these alkaloids that end with the ine suffix. These are not as suspicious as the former because they lead to an inactive iso-LSD. They will look like this: the ergotamine isomer = ergotaminine, the ergonovine isomer = ergonovinine, etc. These analogs are easily converted to the active forms or they may be used exactly as the non-iso versions to give the iso-LSD, which is converted very easily to LSD as also described below.


Jeg tror dog, at det ville tjene dig rigtig godt at finde en mere ydmyg tilgang til verden. Der er altid et lag mere, og jeg lover dig at du aldrig kommer til at forstå noget som helst fuldt ud. Det har intet med dig at gøre, det er ikke fordi jeg tror du er dum - verden er bare et ualmindeligt kompliceret sted, som for det meste kun lader sig forstå gennem en-eller-anden grad af simplificering. I starten af 1900-tallet troede de mest prominente fysikere, at alt inden for feltet snart var afklaret - se hvordan det gik.

Der er med garanti mange på dette forum der gerne vil være dig behjælpelig, men det er umuligt at hjælpe en person, der samtidig med at spørge om hjælp udstråler en "jeg har styr på det hele"-attitude. For det har du jo tydeligvis ikke. Det er der ingen der har. :)

Denne kommentar relaterer iøvrigt ikke eksklusivt til dette indlæg, men mere generelt den tilgang du synes at have.


Top
 Profil  
 
Indlæg: 01 jun 2015 19:49 
Offline
Medlem

Tilmeldt: 26 apr 2015 15:28
Indlæg: 79
sry hvis jeg virkede som en douchebag, men blev squ træt af spørgsmål, for har overvejet hele situationen, og smuthuller er det jeg er bedst til at finde, og hvis jeg ikke kan finde et så laver jeg squ :P så helt galt kan det ikke gå, og det kun en prøve eksamen, så vi er klar til næste år, så der inge censor, kun en af de andre klassers lære uover vores :)


Top
 Profil  
 
Indlæg: 01 jun 2015 19:51 
Offline
Medlem

Tilmeldt: 26 apr 2015 15:28
Indlæg: 79
og indrømmer, at delvist er det en del af et vædemål mig og drengene har kørende :P


Top
 Profil  
 
Indlæg: 01 jun 2015 22:35 
Offline
Medlem
Brugeravatar

Tilmeldt: 25 aug 2010 23:22
Indlæg: 81
Lav kobbersulfat og sig til drengene at du er den næste Walter White 8)

_________________
To, tre, fir', trod' det var en flue!


Top
 Profil  
 
Vis indlæg fra foregående:  Sorter efter  
Skriv nyt emne Svar på emne  [ 22 indlæg ]  Gå til side 1, 2  Næste

Alle tider er UTC + 1 time [DST ]


Hvem er online

Brugere der læser dette forum: Ingen og 10 gæster


Du kan ikke skrive nye emner
Du kan ikke besvare emner
Du kan ikke redigere dine indlæg
Du kan ikke slette dine indlæg

Søg efter:
Hop til:  
Powered by phpBB® Forum Software © phpBB Group
Danish translation & support by Olympus DK Team