Min vægt er ikke identisk med den der sælges fra siden og vejer kun i 1/100 g (2 decimaler), men jeg tænker dog at der ikke kan være den store forskel i softwaren.
I manualen er angivet en guide til kalibrering, der lyder som følger:
1) Turn the scale on as described above (tryk på [l/O])
2) Once the scale is at zero, press and hold the [M] key for about 3 seconds. The display will show "CAL".
3) Press the [M] key again, and the display will show the required calibration weight (ie 500g or 200g). If you wish yo use 100g calibration weight instead, press the T key. The display will change to show 100g.
4) Place the calibration weight on the center of the platform and wait for the display to show "PASS".
5) The scale will return to normal weighing mode. Calibration is complete.
Håber at det virker